Additional headlight HIGHSIDER PENTA LED black aluminum approved

homologated LED daytime running light with 5 power LEDs with parking light function ensures a good perception of motorcyclists by other road users. Positioned in a rectangular matte black aluminum housing, the daytime running light is produced for universal mounting. With this daytime running light, the light switches to the darkened parking light (position light) mode when switching to the low beam. Dimensions: Width: 170 mm Height: 37 mm Depth: 61 mm Technical specifications: Daytime running light with energy consumption: 12.5 volts max. 0.4 amps (corresponds to about 5 watts) Energy-efficient parking light function: approx. 12.5 volts 0.08 amps (corresponds to about 1 watt) connections: Black cable = earth (-) Red cable = positive (+), connected to positive switched (ignition). White cable = control line, is connected to the line more than the position light. Delivery: 1 piece Note 1 - with existing light switch: Operation of the HIGHSIDER LED daytime running light requires a manually switched dipped beam via a light switch. The daytime running light must be connected in such a way that it switches off automatically when the main headlamp is switched on (exception: function of the headlamp flasher) or is inactive. The rear light must always remain on, i.e. connected to the plus ignition. Attention: any other parking lights / front position lights on the vehicle must be disconnected, as a maximum of 2 parking lights can be used on the vehicle. Note 2 - without light switch present: Daytime running light can also be used on vehicles without light switch. For example, the following components are required: Switch: HIGHSIDER DRL CONTROL-BOX CB1 (switches from low beam to daytime running light)